GetInLight Swivel and Dimmable LED Under Cabinet Light with ETL Listed, 12 Inch, Warm White, White Finished, IN-0207-1

GetInLight Swivel and Dimmable LED Under Cabinet Light with ETL Listed, 12 Inch, Warm White, White Finished, IN-0207-1

Rated 5.00 out of 5 based on 4 customer ratings
(4 customer reviews)

$49.90

  • Swivel Design Under-cabinet lighting for Directional Light Control, 120 Degree Beam Angle with 135 Degree Rotatable Axis
  • Aluminum Housing with Easy Access Knock-outs and Tempered Glass Diffuser
  • Even Light Distribution Technology to Prevent “Hot Spots”
  • Dimmable with Most Wall/Box Dimmers, Hi/Low Switch for Non-dimming Applications
  • Hardwired or Plugged-In installation

GetInLight Swivel LED Under Cabinet light is built with aluminum housing, a prismatic tempered glass diffuser, and an ABS rocker switch. the LED light source has a 50,000-hour rated lifespan. 90 CRI. Dimmable using a standard dimmer. Linkable up to 20 units. Can be direct wired (all accessories included), and attached to the cabinet with 2 captive mounting screws, which provides a smoother installation. Knockouts spaced every 4″ on top and back offer maximum wiring flexibility. Includes 6′ cord and plug, 12″ connecting cable, End to End connector and hardwire connector. ETL listed product.

SKU: IN-0207-1

4 reviews for GetInLight Swivel and Dimmable LED Under Cabinet Light with ETL Listed, 12 Inch, Warm White, White Finished, IN-0207-1

  1. 5 out of 5

    Perfect product for my cabinet!

    Jade
    Jade
  2. 5 out of 5

    Purchased to replace a hard wired fluorescent light, with bad ballast. May as well go LED, although no reviews were available at the time. Other LED’s were eliminated due to bad reviews or poor design(by looks or reviews). Again, love design, swivel, glass diffuser, ability to use a dimmer. But…it came with no wiring instructions!!! Really!! So found a black wire and a white wire, pulled them out and tested them on temporary circuit, it worked. Although is has a knockout every 4 inches, only one knockout, in the middle back of the light, on a removable plate, allows you to screw the electrical connections so they will be inside. Also, there is nowhere to attach a ground wire. I basically pulled the ground wire back out through another knockout, and then drilled a hold to attach the ground wire to an external screw to the body on the back of the device. Multiple devices can be wired together via a side plate(although, again, specific instructions of this would really, really be nice)

    Robert C Mac on
    Robert C Mac on
  3. 5 out of 5

    This under cabinet light was very easy to install. The light can be hard wired into your house electric and then connect up to 20 of the light fixtures on one circuit. We did not choose to hard wire the light, but instead we used the cord that it came with to plug the light in.
    We have a few LED under cabinet lights and this is the first one that we have that can be angled. The light can be angled 120 degrees making it easier to get it at the angle that you need it at .
    I like the slight yellow tint that the LED light has to it making for a natural look. The light is very easy on the eyes with reading. It gives off plenty of light to illuminate a room.
    The on/off switch is positioned on the light in an easy to access position, just to the right of the power cord behind the covered light area.
    I was sent this item by the distributor to review and have found it to be of excellent quality, easy to install and exactly as described.

    Fred & Kim
    Fred & Kim
  4. 5 out of 5

    So far so good. I had a worker install for me. No problem. Light is attractive and works well.

    Kevin Rogers
    Kevin Rogers
Add a review

Your email address will not be published. Required fields are marked *